Multiple Messages
Any button can send more than its own message. Under each button in the editor, Also send lists extra messages that go out right after the button's own one, in the order listed. Click + message to add one.
The extras take the same message types as a keytimes entry: CC, Note, PC Fixed, PC+ / PC-, CC+ / CC-, HID, and Page+ / Page- / Page Jump. Each MIDI message has its own channel.
CC+ / CC- here step a CC of their own: set its CC, and optionally Step (default 1), Min / Max (default 0–127, starting at Min) and wrap (on by default). The value is shared with any CC+ / CC- button on the same CC and channel, so they stay in step.
When they're sent
Buttons that turn on and off get two lists: one for turning on, one for turning off.
| Mode | First list | Second list |
|---|---|---|
| Toggle | when turned on | when turned off |
| Momentary | on press | on release |
| Select (CC, re-press set to Deselect) | when selected | when deselected |
| Flash, Select, page and CC+/CC- buttons | on press | — |
HID buttons in momentary mode only flash, so they get just the press list.
Example
A toggle on CC 20 that switches an amp channel and the matching delay preset together:
- Also send when turned on: PC Fixed with program 12, then CC 30 with value 127 on channel 2
- Also send when turned off: PC Fixed with program 4, then CC 30 with value 0 on channel 2
Turning it on sends CC20=127, then PC12, then CC30=127 on channel 2. Turning it off sends CC20=0, PC4, CC30=0.
Things to know
- Incoming MIDI only follows the button's own message. The extras don't change how the LED reacts to the host.
- A CC+ / CC- extra only picks up a value the host sends if a CC+ / CC- button on the same CC and channel is on the current page.
- In keytimes mode, these lists don't apply. Put the messages in the cycle entries instead.